[Tutorial] How to fix an Android phone bricked by installing Chainfire 3D

If your Android phone is stuck at brand logo as a result of you installing Chainfire 3D and restarting or rebooting your phone then this quick guide will help you.
 
1. Install ADB drivers on your Computer (use https://forum.hovatek.com/thread-588.html)
2. Connect the phone to the PC. Do so while stuck at logo, recovery mode (volume up + power) or factory mode (volume down + power) ; whichever mode that ADB can detect the phone
3. Launch ADB
4. Run the following commands in ADB (press Enter after each)

Code:

adb devices
adb shell
su
cd /system/lib
cf3d_uninstall.sh
adb reboot

5. The phone should reboot normally. You can then uninstall Chainfire 3D
6. If that doesn't work then try

Code:

adb devices
adb shell
su
sh /system/lib/cf3d_uninstall.sh
adb reboot

Sent from my itel it1452 using Hovatek mobile